Dell Wyse 5470, Service Manual

Page: 34 / 79

Steps
1 Place the touch pad into the slot on the palm-rest and keyboard assembly.
2 Replace the four screws (M2x2) that secure the touch pad to the palm-rest and keyboard assembly.
3 Adhere the two tapes that secure the touch pad.
4 Adhere the touch pad cable on to the palm-rest and keyboard assembly.
5 Slide the touch pad cable into its connector on the system board and close the latch to secure the cable.
6 Place the touch pad bracket into the slot on the palm-rest and keyboard assembly.
7 Replace the three screws (M2x2) that secure the touch pad bracket to the palm-rest and keyboard assembly.
8 Adhere the tape that secures the bracket to the palm-rest and keyboard assembly.
Next steps
1 Installing the battery .
2 Installing the base cover .
3 Installing the SD memory card .
4 Follow the procedure in After working on your thin client .
VGA daughterboard
Removing the VGA daughterboard
Prerequisites
1 Follow the procedure in Before working on your thin client .
2 Removing the SD memory card .
3 Removing the base cover .
34 Removing and installing components