Steps
1
Align the notch on the memory module with the tab on the memory module slot.
2
Slide the memory module firmly into the slot at an angle.
3
Press the memory module down until the clips secure it.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1
Installing the
2
Installing the
3
Installing the
4
Follow the procedure in
After working on your thin client
Solid-state drive
Removing the M.2 solid-state drive
Prerequisites
1
Follow the procedure in
Before working on your thin client
2
Removing the
.
3
Removing the
.
4
Removing the
.
About this task
The following image indicates the location of the M.2 solid-state drive and provides a visual representation of the removal procedure:
20
Removing and installing components
Summary of Contents for Wyse 5470
