Dell Wyse 5470, Service Manual

Page: 51 / 79

Steps
1 Remove the three screws (M2.5x5) that secure the right hinge to the system board, and palm-rest and keyboard assembly.
2 Lift the right hinge from the system board, and the palm-rest and keyboard assembly.
3 Disconnect the power adapter cable from the system board.
4 Remove the power adapter cable from the routing guide.
5 Remove the screw (M2x3) that secures the power adapter port to the palm-rest and keyboard assembly.
6 Lift the power adapter port with the cable from the palm-rest and keyboard assembly.
Installing the power adapter port
Prerequisite
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power adapter port and provides a visual representation of the installation procedure:
Removing and installing components 51