Dell Vostro 15 7510 Service Manual Download Page 74

Page: 74 / 85

Table 13. System setup options—System Management menu

System Management

Service Tag

Displays the Service Tag of the computer.

Asset Tag

Create a computer Asset Tag.

AC Behavior

Wake on AC

Enable or disable the wake on AC option.

By default, the option is enabled.

Auto on Time

Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.

By default, the option is disabled.

First Power On Date

Allows you to set ownership date.

By default, the option is disabled.

Table 14. System setup options—Keyboard menu

Keyboard

Numlock Enable

Enable or disable the Numlock function when the computer boots.

By default, the option is enabled.

Fn Lock Options

By default, the Fn lock option is enabled.

Lock Mode

●

Lock Mode Standard - Traditional F1-F12 functions

●

Lock Mode Secondary - Enables secondary functions on the Fn keys.

Keyboard illumination

Allows you to set Keyboard illumination settings.

By default, the

Bright

option is enabled.

Keyboard Backlight Timeout on AC

Defines the timeout value for keyboard backlight when AC adapter is plugged
into the system.

By default, the option

1 minute

is enabled.

Keyboard Backlight Timeout on Battery

Defines the timeout value for keyboard backlight when the system is running
only on system power.

By default, the option

1 minute

is enabled.

Table 15. System setup options—Pre-boot Behavior menu

Pre-boot Behavior

Adapter Warnings

Enable Adapter Warnings

Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.

By default, the option is enabled.

Warnings and Errors

Enable or disable the action to be done when a warning or error is encountered.

By default, the

Prompt on Warnings and Errors

option is enabled.

USB-C Warnings

Enable or disable dock warning messages.

By default, the

Enable Dock Warning Messages

option is enabled.

Fastboot

Enable to set the speed of the boot process.

By default, the

Thorough

option is enabled.

Extend BIOS POST Time

Set the BIOS POST time.

System setup

Summary of Contents for Vostro 15 7510






















































































Search results

Summary of Contents for Vostro 15 7510

Reviews:

Related manuals for Vostro 15 7510

Brands by name

Popular brands

Dell Vostro 15 7510, Service Manual

Search results

Summary of Contents for Vostro 15 7510

Reviews:

Related manuals for Vostro 15 7510

Brands by name

Popular brands