Dell Vostro 15 7510 Service Manual Download Page 4

Page: 4 / 85

I/O board.............................................................................................................................................................................39

Removing the I/O board............................................................................................................................................39
Installing the I/O board.............................................................................................................................................. 40

Speakers...............................................................................................................................................................................41

Removing the speakers...............................................................................................................................................41
Installing the speakers................................................................................................................................................ 42

Touchpad.............................................................................................................................................................................43

Removing the touchpad.............................................................................................................................................43
Installing the touchpad...............................................................................................................................................44

Display assembly................................................................................................................................................................46

Removing the display assembly............................................................................................................................... 46
Installing the display assembly ................................................................................................................................ 48

Power-button board with fingerprint reader..............................................................................................................50

Removing the power-button board ....................................................................................................................... 50
Installing the power-button board........................................................................................................................... 51

Power button with optional fingerprint reader........................................................................................................... 51

Removing the power-button with optional fingerprint reader.......................................................................... 51
Installing the power-button with optional fingerprint reader........................................................................... 52

Power button with fingerprint reader.......................................................................................................................... 53

Removing the power button with fingerprint reader..........................................................................................53
Installing the power button with fingerprint reader............................................................................................54

Power-adapter port..........................................................................................................................................................55

Removing the power-adapter port......................................................................................................................... 55
Installing the power-adapter port............................................................................................................................56

System board..................................................................................................................................................................... 57

Removing the system board..................................................................................................................................... 57
Installing the system board....................................................................................................................................... 60

Palm-rest and keyboard assembly................................................................................................................................ 62

Removing the palm-rest and keyboard assembly................................................................................................ 62
Installing the palm-rest and keyboard assembly.................................................................................................. 63

Chapter 3: Drivers and downloads............................................................................................... 65

Downloading the drivers..................................................................................................................................................65

Chapter 4: System setup.............................................................................................................66

Updating BIOS on systems with BitLocker enabled............................................................................................ 77
Updating BIOS using USB flash drive..................................................................................................................... 77

System and setup password...........................................................................................................................................78

Assigning a system setup password....................................................................................................................... 78
Deleting or changing an existing system setup password................................................................................. 78

Contents

Summary of Contents for Vostro 15 7510






















































































Search results

Summary of Contents for Vostro 15 7510

Reviews:

Related manuals for Vostro 15 7510

Brands by name

Popular brands

Dell Vostro 15 7510, Service Manual

Search results

Summary of Contents for Vostro 15 7510

Reviews:

Related manuals for Vostro 15 7510

Brands by name

Popular brands