4. Align the screw holes on the touchpad bracket with the screw holes on the palm-rest and keyboard assembly.
5. Replace the three (M2x1.8) and two (M2x3) screws that secure the touchpad bracket to the palm-rest and keyboard
assembly.
6. Slide the touchpad cable into the connector on the touchpad and close the latch to secure the cable.
7. Adhere the tape that secures the touchpad bracket to the palm-rest and keyboard assembly.
8. Adhere the tape that secures the speaker cable to the touchpad.
Next steps
1. Install the
.
2. Install the
.
After working inside your computer
.
Display assembly
Removing the display assembly
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
4. Remove the
.
About this task
The following images indicate the location of the display assembly and provide a visual representation of the removal procedure.
46
Removing and installing components