Dell Vostro 15 7510, Service Manual, Page: 53 / 85

Steps
1. Using the alignment posts, place the power-button with optional fingerprint reader into its slot on the palm-rest and
keyboard assembly.
2. Replace the screw (M2x4) that secures the power-button with optional fingerprint reader to the palm-rest and keyboard
assembly.
Next steps
1. Install the power-button board .
2. Install the heat sink .
3. Install the GPU fan .
4. Install the base cover .
5. Exit Service Mode .
6. Follow the procedure in After working inside your computer .
Power button with fingerprint reader
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Enter Service Mode .
3. Remove the base cover .
4. Remove the heat sink .
5. Remove the GPU fan .
6. Remove the power-button board .
Removing and installing components 53