Installing the power-button board
About this task
The following images indicate the location of the power-button board and provide a visual representation of the installation
procedure.
Steps
1. Align and place the power-button board along with the cable on the palm-rest and keyboard assembly.
2. Replace the screw (M2x4) that secures the power-button board with the cable to the palm-rest and keyboard assembly.
3. Connect the power-button cable to the I/O board.
Next steps
1. Install the
.
2. Install the
3. Install the
.
4. Exit
.
After working inside your computer
.
Power button with optional fingerprint reader
Removing the power-button with optional fingerprint reader
Prerequisites
Before working inside your computer
.
2. Remove the
.
Removing and installing components
51
