Steps
1. Align the screw holes on the heat sink and Mylar cover with the screw holes on the system board.
2. In sequential order (as indicated on the Mylar cover), tighten the seven captive screws that secure the heat sink to the
system board.
Next steps
1. Install the
.
2. Exit
.
After working inside your computer
.
I/O board
Removing the I/O board
Prerequisites
Before working inside your computer
.
2. Enter
.
3. Remove the
.
4. Remove the
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
Removing and installing components
39
