Dell Precision Workstation 650 User Manual Download Page 35

Page: 35 / 326

About Your Computer—Dell Precision 650

parallel connector

Connect a parallel device, such as a printer, to the parallel connector. If you have a

USB printer, plug it into a USB connector.

NOTE:

The integrated parallel connector is automatically disabled if the

computer detects an installed card containing a parallel connector configured to
the same address. For more information, see "System Setup Options."

line-out connector

Use the green line-out connector (available on computers with integrated sound)

to attach headphones and speakers).
On computers with a sound card, use the connector on the card.

line-in connector

Use the blue line-in connector (available on computers with integrated sound) to

attach a record/playback device such as a cassette player, CD player, or VCR.
On computers with a sound card, use the connector on the card.

mouse connector

Plug a standard mouse into the green mouse connector. Turn off the computer

and any attached devices before you connect a mouse to the computer. If you have

a USB mouse, plug it into a USB connector.
If your computer is running the Microsoft

Windows

2000 or Windows XP

operating system, the necessary mouse drivers have been installed on your hard

drive.

link integrity light

• Green — A good connection exists between a 10-Mbps network and the

computer.

• Orange — A good connection exists between a 100-Mbps network and the

computer.

• Yellow — A good connection exists between a 1-Gbps (or 1000-Mbps)

connection.

• Off — The computer is not detecting a physical connection to the network.

network connector

Attach the UTP cable to an RJ45 jack wall plate or to an RJ45 port on a UTP

concentrator or hub and press the other end of the UTP cable into the network

connector until the cable snaps securely into place.
The use of Category 5 wiring and connectors is recommended for our customers’

networks. If Category 3 wiring must be used, force the network speed to 10 Mbps

to ensure reliable operation.
On computers with a network connector card, use the connector on the card.

network activity light

Flashes a yellow light when the computer is transmitting or receiving network

data. A high volume of network traffic may make this light appear to be in a steady

"on" state.

Summary of Contents for Precision Workstation 650







































































































































































































































































































































Search results

Summary of Contents for Precision Workstation 650

Reviews:

Related manuals for Precision Workstation 650

Brands by name

Popular brands

Dell Precision Workstation 650, User Manual

Search results

Summary of Contents for Precision Workstation 650

Reviews:

Related manuals for Precision Workstation 650

Brands by name

Popular brands