Installing a flex bay
Prerequisites
1.
Follow the safety guidelines listed in the safety instructions section.
2.
Keep the Phillips #2 screwdriver ready.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Steps
1.
Align the tabs on the flex bay with the slots on the front of the chassis.
2.
Insert the flex bay into the chassis until the tabs click into place.
3.
Install the two screws to secure the flex bay to the chassis.
Next steps
Follow the procedure listed in the After working inside your system section.
Figure 33. Installing a flex bay
1.
flex bay
2.
tab (3)
3.
screw hole (2)
4.
release latch
5.
screw (2)
Related Links
Safety instructions
After working inside your system
103
