Figure 13. Installing the power switch
Next steps
1
Install the bezel.
2
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the bezel
After working inside your system
Chassis intrusion switch
The chassis intrusion switch detects and logs when the system cover is removed. This switch is activated as soon as the system cover is
removed.
Removing the chassis intrusion switch
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Disconnect the chassis intrusion switch cable from the system board.
Steps
1
Hold the chassis intrusion switch and slide the switch into the free space next to it.
2
Push the chassis intrusion switch down and out of the slot.
Installing and removing system components
47
