CAUTION:
Dell recommends you to use ECC DIMMs to minimize the risk of uncorrectable system error, data loss and/or silent
data corruption. Non-ECC DIMM is not used for mission-critical applications.
NOTE:
Non-ECC DIMMs are supported only in selected countries, for more information contact your sales representative.
Table 14. Memory specifications
Memory module sockets
Memory capacity
Minimum RAM
Maximum RAM
Four 288-pin
4 GB, 8 GB, and 16 GB
4 GB
64 GB
Drive specifications
Hard drives
The PowerEdge T30 system supports one of the following hard drive configurations:
Table 15. Hard drive configurations
Number of hard drives
Configuration
Six hard drives
Up to four 3.5-inch hard drive, internal, cabled SATA or SATA SSD
drives and two 2.5-inch hard drive (optional), internal, cabled SATA,
or SATA SSD drives.
Three hard drives
Up to three 3.5-inch hard drive, internal, cabled SATA or SATA SSD
drives and one optical drive (optional), internal, cabled SATA, or
SATA SSD drives.
Four hard drives
Up to four 3.5-inch hard drive, internal, cabled SATA or SATA SSD
drives.
NOTE:
If you install more than four hard drives, you need to get an additional SATA controller card, SATA cables (minimum 1.6
ft) and power extension cables.
Optical drive
The PowerEdge T30 system supports an optional slim 9.5 mm SATA DVD-ROM drive or DVD+/-RW drive.
NOTE:
External optical drives can be connected through the USB ports.
Ports and connectors specifications
USB ports
The PowerEdge T30 system supports up to:
•
Six USB 2.0-compliant ports
•
Six USB 3.0-complaint ports
Technical specifications
19
