Dell PowerEdge T30 Owner'S Manual Download Page 12

Page: 12 / 107

Item

Indicator, Button, or Connector

Icon

Description

USB 2.0 port (2)

Use the USB 2.0 port to connect USB devices to the system.

Display ports (2)

Use the Display ports to connect other external display
devices to the system.

HDMI port

Use the HDMI (High-Definition Multimedia Interface)
connector to transfer video data and compressed or
uncompressed digital audio data to a compatible computer
monitor or video projector.

USB 3.0 port (4)

Use the USB 3.0 port to connect USB devices to the system.

Line-out connector

Use the Line-out connector to connect the input of an audio
device to the system.

Line-in or microphone connector

Use the Line-in or Microphone connector to connect other
input audio devices to the system.

Expansion card slots (4)

Use the Expansion card slots to connect up to three full-
height PCIe expansion cards and one full-height PCI
expansion card.

Serial port

Use the Serial connector to connect a serial device to the
system.

Ethernet port (NIC)

One integrated 10/100/1000 Mbps Ethernet port. Use this
port to connect the system to the network.

Security-cable slot

Allows you to connect a cable lock to the system.

Padlock ring

Allows you to lock the system cover.

Diagnostic Indicators

The diagnostic indicators on the system indicate operation and error status.

Diagnostic indicators on the front panel

NOTE:

No diagnostic indicators are lit when the system is turned off. To start the system, plug it into a working power source

and press the power button.

Table 4. Diagnostic indicators on the front panel

Icon

Description

Condition

Corrective action

Hard-drive indicator

The indicator flashes amber if
there is a hard-drive error.

Check the hard drive. If the
problem persists, see the
Troubleshooting hard drive
section or the Getting help
section.

Power-on indicator

The indicator flashes amber and
white if there is a component
failure.

This is due to component failure
in the system. For more
information, see the Power on
LED indicator codes section. If

Dell PowerEdge T30 system overview

Summary of Contents for PowerEdge T30












































































































Search results

Summary of Contents for PowerEdge T30

Reviews:

Related manuals for PowerEdge T30

Brands by name

Popular brands

Dell PowerEdge T30, Owner'S Manual

Search results

Summary of Contents for PowerEdge T30

Reviews:

Related manuals for PowerEdge T30

Brands by name

Popular brands