Installing and removing system components
Safety instructions
WARNING:
Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by
yourself.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of electric shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
NOTE:
Dell recommends that you always use a static mat and static strap while working on components inside the system.
NOTE:
To ensure proper operation and cooling, all bays in the system and system fans must be populated always with either a
component or with a blank.
Before working inside your system
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1
Turn off the system, including any attached peripherals.
2
Disconnect the system from the electrical outlet and disconnect the peripherals.
3
Remove the system cover.
Related links
Safety instructions
Removing the system cover
After working inside your system
Prerequisites
Follow the safety guidelines listed in the Safety instructions section.
Steps
1
Install the system cover.
2
Place the system upright on a flat, stable surface.
3
Reconnect the peripherals and connect the system to the electrical outlet.
4
Turn on the system, including any attached peripherals.
Related links
Safety instructions
Installing the system cover
6
Installing and removing system components
39
