Dell POWEREDGE SC440 Hardware Owner'S Manual Download

Page: 115 / 144

Getting Help

115

Canada (North York, Ontario)

International Access Code:

011

Online Order Status:

www.dell.ca/ostatus

AutoTech (automated Hardware and Warranty
Support)

toll-free: 1-800-247-9362

Customer Service (Home Sales/Small Business)

toll-free: 1-800-847-4096

Customer Service (med./large business,
government)

toll-free: 1-800-326-9463

Customer Service (printers, projectors, televisions,
handhelds, digital jukebox, and wireless)

toll-free: 1-800-847-4096

Hardware Warranty Support (Home Sales/Small
Business)

toll-free: 1-800-906-3355

Hardware Warranty Support (med./large bus.,
government)

toll-free: 1-800-387-5757

Hardware Warranty Support (printers, projectors,
televisions, handhelds, digital jukebox, and wireless)

1-877-335-5767

Sales (Home Sales/Small Business)

toll-free: 1-800-387-5752

Sales (med./large bus., government)

toll-free: 1-800-387-5755

Spare Parts Sales & Extended Service Sales

1 866 440 3355

Cayman Islands

E-mail: [email protected]

General Support

1-877-262-5415

Chile (Santiago)

Country Code:

City Code:

Website:

www.dell.com/cl

E-mail: [email protected]

Sales and Customer Support

toll-free: 1230-020-4823

Country (City)
International Access Code
Country Code
City Code

Department Name or Service Area,

Website and E-Mail Address

Area Codes,

Local Numbers, and

Toll-Free Numbers

book.book Page 115 Tuesday, August 25, 2009 1:14 PM

Summary of Contents for POWEREDGE SC440

















































































































































Search results

Summary of Contents for POWEREDGE SC440

Reviews:

Related manuals for POWEREDGE SC440

Brands by name

Popular brands

Dell POWEREDGE SC440, Hardware Owner'S Manual

Search results

Summary of Contents for POWEREDGE SC440

Reviews:

Related manuals for POWEREDGE SC440

Brands by name

Popular brands