Dell POWEREDGE SC440 Hardware Owner'S Manual Download

Page: 55 / 144

Installing System Components

Figure 3-12.

Cabling a SAS or SATA Hard Drive to a SAS Controller Expansion Card

Ensure that all connectors are properly cabled and firmly seated.

Close the system. See "Closing the System" on page 41.

Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.

Press <F2> to enter the System Setup program (see "Entering the System Setup Program" on
page 27), and ensure that the drive’s controller is enabled.

Exit the System Setup program and reboot the system.

SAS controller card

data cable to SAS controller
card

AUX_LED connector

power cable to hard drive

SAS or SATA hard drives (2)

data cable to hard drive

hard drive activity indicator
cable to SAS controller card

book.book Page 55 Tuesday, August 25, 2009 1:14 PM

Summary of Contents for POWEREDGE SC440

















































































































































Search results

Summary of Contents for POWEREDGE SC440

Reviews:

Related manuals for POWEREDGE SC440

Brands by name

Popular brands

Dell POWEREDGE SC440, Hardware Owner'S Manual

Search results

Summary of Contents for POWEREDGE SC440

Reviews:

Related manuals for POWEREDGE SC440

Brands by name

Popular brands