manualshive.com logo in svg

Dell PowerEdge R930, Owner'S Manual

Share
Download
Dell PowerEdge R930 Owner'S Manual Download Page 5

Cooling fans...................................................................................................................................................................... 82

Removing a cooling fan............................................................................................................................................. 83
Installing a cooling fan............................................................................................................................................... 84
Removing the fan tray...............................................................................................................................................85
Installing the fan tray ................................................................................................................................................ 87

Cable management tray.................................................................................................................................................. 88

Removing the cable management tray .................................................................................................................. 88
Installing the cable management tray......................................................................................................................90

Hard drives........................................................................................................................................................................92

Limitations for SATA SSDs backplane configurations:.......................................................................................... 92
Removing a 2.5-inch hard drive blank..................................................................................................................... 93
Installing a 2.5-inch hard drive blank....................................................................................................................... 94
Removing a hot swappable hard drive carrier........................................................................................................ 94
Installing a hot swappable hard drive carrier.......................................................................................................... 95
Removing a hot swappable hard drive from a hard drive carrier..........................................................................97
Installing a hot swappable hard drive into a hard drive carrier..............................................................................97

Optical drive (optional)....................................................................................................................................................98

Removing the optical drive....................................................................................................................................... 98
Installing the optical drive......................................................................................................................................... 99

Internal USB memory key (optional)............................................................................................................................100

Replacing the optional internal USB memory key................................................................................................. 101

Expansion cards and expansion card risers................................................................................................................. 102

Expansion card installation guidelines.................................................................................................................... 102
Removing the left or right expansion card riser blank......................................................................................... 104
Installing the left or right expansion card riser blank............................................................................................105
Removing the left or right expansion card riser................................................................................................... 106
Installing the left or right expansion card riser...................................................................................................... 107
Removing an expansion card from expansion card risers....................................................................................109
Installing an expansion card into the expansion card risers.................................................................................. 111

Network Daughter Card riser........................................................................................................................................ 115

Removing the Network Daughter Card riser......................................................................................................... 115
Installing the Network Daughter Card riser............................................................................................................116

Network daughter card.................................................................................................................................................. 118

Removing the network daughter card....................................................................................................................118
Installing the network daughter card...................................................................................................................... 119

Chassis intrusion switch................................................................................................................................................ 120

Removing the chassis intrusion switch...................................................................................................................121
Installing the chassis intrusion switch.................................................................................................................... 122

SD vFlash card (optional).............................................................................................................................................. 123

Removing the optional SD vFlash card..................................................................................................................123

Internal dual SD module (optional)............................................................................................................................... 124

Removing an internal SD card.................................................................................................................................124
Installing an internal SD card................................................................................................................................... 125
Removing the optional internal dual SD module................................................................................................... 126
Installing the optional internal dual SD module .....................................................................................................127

Integrated storage controller card................................................................................................................................ 128

Removing the integrated storage controller card.................................................................................................129

Contents

5

Summary of Contents for PowerEdge R930







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands