Item
Indicator, Button, or Connector Icon
Description
Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors that include:
•
Two 10/100/1000 Mbps NIC connectors
•
Two 100 Mbps/1 Gbps/10 Gbps and two SFP+/10 GbE T
connectors
•
Four SFP+/10 GbE T connectors
7
USB port (2)
Use the USB 2.0 port to connect USB devices to the system. This
port is 4-pin, USB 2.0 compliant.
8
Serial port
Use the serial port to connect a serial device to the system. For
more information about the supported serial port, see the Technical
specifications section.
9
System identification port
Use the system identification port to connect the system status
indicator assembly through the optional cable management arm.
10
System identification button
Press the system ID button:
•
To locate a particular system within a rack.
•
To turn the system ID on or off.
NOTE:
To reset the iDRAC (if not disabled in System
Setup), press and hold the button for more than 15
seconds.
NOTE:
If the system stops responding during POST, press
and hold the system ID button (for more than five
seconds) to enter the BIOS progress mode.
14
About the PowerEdge R930
