manualshive.com logo in svg

Dell PowerEdge R930, Owner'S Manual

The Dell PowerEdge R930 Owner's Manual is the essential guide to unlock the full potential of your server. This comprehensive manual covers all aspects of setup, maintenance, and troubleshooting, ensuring optimal performance. Download your free copy from manualshive.com to unleash the power of your server and maximize productivity.

Share
Download
background image

Viewing Memory Settings

To view the 

Memory Settings

 screen, perform the following steps:

1 

Turn on, or restart your system.

2 

Press F2 immediately after you see the following message:

F2 = System Setup

NOTE: 

If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart 

your system and try again.

3 

On the 

System Setup Main Menu

 screen, click 

System BIOS

.

4 

On the 

System BIOS

 screen, click 

Memory Settings

.

Related links

Memory Settings
Memory Settings details

Memory Settings details

The 

Memory Settings

 screen details are explained as follows:

Option

Description

System Memory 
Size

Specifies the memory size in the system.

System Memory 
Type

Specifies the type of memory installed in the system.

System Memory 
Speed 

Specifies the memory speed.

System Memory 
Voltage

Specifies the memory voltage.

Video Memory

Specifies the amount of video memory.

System Memory 
Testing

Specifies whether the memory tests are run during system boot. Options are 

Enabled

 and 

Disabled

. This option is 

set to 

Disabled

 by default.

Memory Operating 
Mode

Specifies the memory operating mode. The options available are 

Optimizer Mode

, 

Advanced ECC Mode

, 

Mirror 

Mode

, 

Spare Mode

, 

Spare with Advanced ECC Mode

, 

Dell Fault Resilient Mode

 and 

Dell NUMA Fault Resilient 

Mode

. This option is set to 

Optimizer Mode

 by default.

NOTE: 

The Memory Operating Mode option can have different default and available options based on the 

memory configuration of your system.

NOTE: 

The Dell Fault Resilient Mode option establishes an area of memory that is fault resilient. This 

mode can be used by an operating system that supports the feature to load critical applications or 
enables the operating system kernel to maximize system availability.

Node Interleaving

Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is set to 

Enabled

, memory 

interleaving is supported if a symmetric memory configuration is installed. If the field is set to 

Disabled

, the system 

supports NUMA (asymmetric) memory configurations. This option is set to 

Disabled

 by default.

Snoop Mode

Specifies the Snoop Mode options. The Snoop Mode options available are 

Home Snoop

, 

Early Snoop

, and 

Cluster 

on Die

. This option is set to 

Early Snoop

 by default. This field is available only when the 

Node Interleaving

 is set to 

Disabled

.

NOTE: 

Snoop Mode is only available if the system is installed with four E7 v4 processors.

Related links

Memory Settings
Viewing Memory Settings

46

Pre-operating system management applications

Summary of Contents for PowerEdge R930







































































































































































































Reviews:

No comments

Related manuals for PowerEdge R930

Kaleidescape Terra Installation Manual preview
Terra
Brand: Kaleidescape Pages: 11
Axis 570 MIO Quick Installation Manual preview
570 MIO
Brand: Axis Pages: 10
7starlake ROC286B User Manual preview
ROC286B
Brand: 7starlake Pages: 32
ImageTech printWiFi User Manual preview
printWiFi
Brand: ImageTech Pages: 44
ORiNG IDS-5042 Series User Manual preview
IDS-5042 Series
Brand: ORiNG Pages: 67
IBM 8678 Installation And User Manual preview
8678
Brand: IBM Pages: 96
Acrosser Technology AND-APL1E Series User Manual preview
AND-APL1E Series
Brand: Acrosser Technology Pages: 42
Brother NC-100h Network User'S Manual preview
NC-100h
Brand: Brother Pages: 103
NEC 320Fd Service Manual preview
320Fd
Brand: NEC Pages: 10
NEC 5800 Series Product Manual preview
5800 Series
Brand: NEC Pages: 20
NEC 320Lc EXP356F Getting Started Manual preview
320Lc EXP356F
Brand: NEC Pages: 2
NEC 120Rj-2 Configuration Manual preview
120Rj-2
Brand: NEC Pages: 18
NEC 320 Lb EXP351E Getting Started Manual preview
320 Lb EXP351E
Brand: NEC Pages: 2
NEC Care Standard/300 Maintenance And Service Manual preview
Care Standard/300
Brand: NEC Pages: 11
NEC EXP320R Installation Manual preview
EXP320R
Brand: NEC Pages: 88
NEC EXP320P User Manual preview
EXP320P
Brand: NEC Pages: 89
NEC EXP470A User Manual preview
EXP470A
Brand: NEC Pages: 62
NEC Express 5800/120Ed Installation Procedures Manual preview
Express 5800/120Ed
Brand: NEC Pages: 29

Brands by name

Popular brands

Load more brands