manualshive.com logo in svg

Dell PowerEdge R930, Owner'S Manual

The Dell PowerEdge R930 Owner's Manual is the essential guide to unlock the full potential of your server. This comprehensive manual covers all aspects of setup, maintenance, and troubleshooting, ensuring optimal performance. Download your free copy from manualshive.com to unleash the power of your server and maximize productivity.

Share
Download
background image

Option

Description

Option

Description

Drive Type

Specifies the type of drive attached to the SATA port.

Capacity

Specifies the total capacity of the hard drive. This field is undefined for removable media 
devices such as optical drives.

Related links

SATA Settings
Viewing SATA Settings

Integrated Devices

You can use the 

Integrated Devices

 screen to view and configure the settings of all integrated devices including the video controller, 

integrated RAID controller, and the USB ports.

Related links

Integrated Devices details
System BIOS
Viewing Integrated Devices

Viewing Integrated Devices

To view the 

Integrated Devices

 screen, perform the following steps:

1 

Turn on, or restart your system.

2 

Press F2 immediately after you see the following message:

F2 = System Setup

NOTE: 

If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart 

your system and try again.

3 

On the 

System Setup Main Menu

 screen, click 

System BIOS

.

4 

On the 

System BIOS

 screen, click 

Integrated Devices

.

Related links

Integrated Devices
Integrated Devices details

Integrated Devices details

The 

Integrated Devices

 screen details are explained as follows:

Option

Description

User Accessible 
USB Ports

Enables or disables the USB ports. Selecting 

Only Back Ports On

 disables the front USB ports, selecting 

All Ports 

Off

 disables all USB ports. The USB keyboard and mouse operate during boot process in certain operating systems. 

After the boot process is complete, the USB keyboard and mouse do not work if the ports are disabled.

NOTE: 

Selecting Only Back Ports On and All Ports Off disables the USB management port and also 

restricts access to iDRAC features.

Internal USB Port

Enables or disables the internal USB port. This option is set to 

Enabled

 by default.

Integrated RAID 
Controller

Enables or disables the integrated RAID controller. This option is set to 

Enabled

 by default.

Integrated Network 
Card 1

Enables or disables the integrated network card.

50

Pre-operating system management applications

Summary of Contents for PowerEdge R930







































































































































































































Reviews:

No comments

Related manuals for PowerEdge R930

IBM 150 User Reference Manual preview
150
Brand: IBM Pages: 180
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
TYANO GX38-B5550 Service Engineer'S Manual preview
GX38-B5550
Brand: TYANO Pages: 68
Integra NAS-2.3 Instruction Manual preview
NAS-2.3
Brand: Integra Pages: 40
Crestron CEN-RVS-R210 Quick Start Manual preview
CEN-RVS-R210
Brand: Crestron Pages: 2
Olive Olive OPUS N5 User Manual preview
Olive OPUS N5
Brand: Olive Pages: 24
IBM x3105 - System - 4347 Service Manual preview
x3105 - System - 4347
Brand: IBM Pages: 130
IBM System x3650 Type 7979 Problem Determination And Service Manual preview
System x3650 Type 7979
Brand: IBM Pages: 194
Cavalry CAXA Series User Manual preview
CAXA Series
Brand: Cavalry Pages: 16
Asus AAEON ARES-WHI0 User Manual preview
AAEON ARES-WHI0
Brand: Asus Pages: 76
Asus TS100-E5/PI4 Configuration Manual preview
TS100-E5/PI4
Brand: Asus Pages: 16
Asus VivoPC User Manual preview
VivoPC
Brand: Asus Pages: 42
Asus RS720A-E9-RS24-E User Manual preview
RS720A-E9-RS24-E
Brand: Asus Pages: 162
Asus RS700D-E6 RS8 User Manual preview
RS700D-E6 RS8
Brand: Asus Pages: 164
Asus TS700-E9 Series User Manual preview
TS700-E9 Series
Brand: Asus Pages: 178
Asus TS300-E4 User Manual preview
TS300-E4
Brand: Asus Pages: 224
Asus RS920A-E6/RS8 User Manual preview
RS920A-E6/RS8
Brand: Asus Pages: 162

Brands by name

Popular brands

Load more brands