3
expansion card latch
4
expansion card
Next steps
1
Install an expansion card into the expansion card riser.
2
Install the expansion card riser.
3
Re-connect the cables to the expansion card.
4
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the left or right expansion card riser
Installing an expansion card into the expansion card risers
Installing the left or right expansion card riser
After working inside your system
Installing an expansion card into the expansion card risers
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1
Follow the safety guidelines listed in the Safety instructions section.
2
Follow the procedure listed in the Before working inside your system section.
3
Unpack the expansion card and prepare it for installation. For instructions, see the documentation accompanying the card.
Steps
1
Slide the expansion card latch.
2
Holding the expansion card by its edges, position the card so that the card edge connector aligns with the expansion card connector
on the riser.
3
Insert the card edge connector into the expansion card connector on the riser until the card is fully seated.
4
Insert the expansion card latch.
Installing and removing system components
111
