Dell PowerEdge R410, Hardware Owner'S Manual

Page: 73 / 190

Using the System Setup Program and UEFI Boot Manager
73
To disable the password security:
1
Turn on or reboot your system by pressing <Ctrl><Alt><Del>.
2
Type your password and press <Ctrl><Enter>.
When Password Status is Locked , you must type the password and press
<Enter> when prompted at reboot.
If an incorrect system password is entered, the system displays a message and
prompts you to re-enter your password. You have three attempts to enter the
correct password. After the third unsuccessful attempt, the system displays an
error message that the system has halted and must be shut down manually
using the power button.
Even after you shut down and restart the system, the error message continues
to be displayed until the correct password is entered.
NOTE:
You can use the
Password Status
option in conjunction with the
System
Password
and
Setup Password
options to protect your system from unauthorized
changes.
Disabling the System Password
If the system password is already set, you can disable it by typing the password
during POST and pressing <Ctrl><Enter> or you can enter the system
setup and press <Enter> twice when you are in the system password menu.
Changing an Existing System Password
1
Enter the System Setup program by pressing <F2> during POST.
2
Select the System Security screen.
3
Verify that the Password Status is Unlocked .
4
Type the new system password in the two password fields.
The System Password field changes to Not Enabled if the password was
deleted.
book.book Page 73 Tuesday, March 31, 2009 5:26 PM