manualshive.com logo in svg

Dell PowerEdge R410, Hardware Owner'S Manual

Share
Download
Dell PowerEdge R410 Hardware Owner'S Manual Download Page 167

Getting Help

167

Getting Help

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355). 

 

NOTE: 

If you do not have an active Internet connection, you can find contact 

information on your purchase invoice, packing slip, bill, or Dell product catalog. 

Dell provides several online and telephone-based support and service options. 
Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or 
customer service issues:

1

Visit 

support.dell.com

.

2

Verify your country or region in the 

Choose A Country/Region

 drop-down 

menu at the bottom of the page. 

3

Click 

Contact Us 

on the left side of the page.

4

Select the appropriate service or support link based on your need.

5

Choose the method of contacting Dell that is convenient for you. 

book.book  Page 167  Tuesday, March 31, 2009  5:26 PM

Summary of Contents for PowerEdge R410































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands