Dell PowerEdge R330 Owner'S Manual Download Page 31

Page: 31 / 160

Option

Description

Write Cache

Enables or disables the command for Embedded SATA drives during POST.

Port A

For

AHCI

RAID

mode, BIOS support is always enabled.

Option

Description

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. This field is
undefined for removable media devices such as optical
drives.

Port B

For

AHCI

RAID

mode, BIOS support is always enabled.

Option

Description

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. This field is
undefined for removable media devices such as optical
drives.

Port C

For

AHCI

RAID

mode, BIOS support is always enabled.

Option

Description

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. This field is

undefined for removable media devices such as optical
drives.

Port D

For

AHCI

RAID

mode, BIOS support is always enabled.

Option

Description

Model

Displays the drive model of the selected device.

Drive Type

Displays the type of drive attached to the SATA port.

Capacity

Displays the total capacity of the hard drive. This field is

undefined for removable media devices such as optical
drives.

Port E

For

AHCI

RAID

mode, BIOS support is always enabled.

Option

Description

Model

Displays the drive model of the selected device.

Summary of Contents for PowerEdge R330

































































































































































Search results

Summary of Contents for PowerEdge R330

Reviews:

Related manuals for PowerEdge R330

Brands by name

Popular brands

Dell PowerEdge R330, Owner'S Manual

Search results

Summary of Contents for PowerEdge R330

Reviews:

Related manuals for PowerEdge R330

Brands by name

Popular brands