3.
Insert the card connector into the expansion card riser connector until the card is firmly seated.
4.
If required, connect the cables to the expansion card.
Next steps
1.
Install the expansion card riser.
2.
Follow the procedure listed in
After working inside your system
.
Related Tasks
Removing the expansion card riser
Installing the expansion card riser
Removing the internal PERC card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the expansion card riser.
4.
Keep the Phillips #2 screwdriver ready.
Steps
1.
Remove the screw from the PERC card lock.
2.
Turn the PERC card lock to disengage the lock from the PERC card.
3.
Push the PERC card lock until the tab on the PERC card lock clicks into the slot on the chassis.
Figure 35. Opening and closing the PERC card lock
1.
slot on the chassis
2. tab on the PERC card lock
3. PERC card lock
4. screw on the PERC card lock
89
