manualshive.com logo in svg

Dell PowerEdge M830, Owner'S Manual, Page: 39 / 133

Share
Download
Dell PowerEdge M830 Owner'S Manual Download Page 39

Figure 5. Removing or installing the blade

1.

release button

2. blade

3. enclosure

Related Links

Installing a blade

Installing a blade

Prerequisites

Ensure that you read the 

Safety instructions

.

CAUTION: Many repairs may only be done by a certified service technician. You should only 

perform troubleshooting and simple repairs as authorized in your product documentation, or as 

directed by the online or telephone service and support team. Damage due to servicing that is 

not authorized by Dell is not covered by your warranty. Read and follow the safety instructions 

that came with the product.

Steps
1.

If you are installing a new blade, remove the plastic cover from the I/O connector(s) and save for 
future use.

2.

Orient the blade so that the handle is on the left side of the blade.

3.

If you are installing the full-height blade in bays 3 or 4, rotate the LCD module to the horizontal 
storage position to prevent accidental damage to the LCD screen.

4.

Align the guide rail on the upper edge of the blade so that the rail fits between the plastic guides on 
the enclosure.

5.

Slide the blade into the enclosure until the handle engages and locks the blade in place.

39

Summary of Contents for PowerEdge M830






































































































































Reviews:

No comments