manualshive.com logo in svg

Dell PowerEdge M830, Owner'S Manual, Page: 30 / 133

Share
Download
Dell PowerEdge M830 Owner'S Manual Download Page 30

Miscellaneous Settings screen

You can use the 

Miscellaneous Settings

 screen to perform specific functions such as updating the asset 

tag, and changing the system date and time.
To view the 

Miscellaneous Settings

 screen, click 

System Setup Main Menu

 → 

System BIOS

 → 

Miscellaneous Settings

.

Menu Item

Description

System Time

Enables you to set the time on the system.

System Date

Enables you to set the date on the system.

Asset Tag

Displays the asset tag and enables you to modify it 
for security and tracking purposes.

Keyboard NumLock

Enables you to set whether the system boots with 
the NumLock enabled or disabled. By default the 

Keyboard NumLock

 is set to 

On

.

NOTE: This option does not apply to 84-key 
keyboards.

F1/F2 Prompt on Error

Enables or disables the F1/F2 prompt on error. By 
default, 

F1/F2 Prompt on Error

 is set to 

Enabled

. 

The F1/F2 prompt also includes keyboard errors.

Load Legacy Video Option ROM

Enables you to determine whether the system 

BIOS loads the legacy video (INT 10H) option ROM 
from the video controller. Selecting 

Enabled

 in the 

operating system does not support UEFI video 
output standards. This field is only for UEFI boot 
mode. You cannot set this to 

Enabled

 if 

UEFI 

Secure Boot

 mode is enabled.

In-System Characterization

This option enables or disables 

In-System 

Characterization

. By default, 

In-System 

Characterization

 is set to 

Disabled

. The two other 

options are

 Enabled

 and 

Enabled - No Reboot

.

NOTE: The default setting for 

In-System 

Characterization

 is subject to change in 

future BIOS releases.

When enabled, In-System Characterization (ISC) 

executes during POST upon detecting relevant 

change(s) in system configuration. This helps in 

optimizing the system power and performance. 

ISC takes about 20 seconds to execute, and system 

reset is required for ISC results to be applied. The 

Enabled - No Reboot

 option executes ISC and 

continues without applying ISC results until the 

next time system reset occurs. The 

Enabled

 option 

executes ISC and forces an immediate system 

reset so that ISC results can be applied. It takes the 

system longer to be ready due to the forced 

system reset. When disabled, ISC does not execute.

30

Summary of Contents for PowerEdge M830






































































































































Reviews:

No comments