Removing and Installing System Components | 235
7
Remove the two screws that secure the 10GbE mezzanine card to the
bracket. See Figure 3-61.
8
Remove the 10GbE mezzanine card from the bracket. See Figure 3-61.
Figure 3-61. Removing and Installing the 10GbE Mezzanine Card
1
screw (2)
2
mezzanine card bracket
3
10GbE mezzanine card
Installing the 10GbE Mezzanine Card
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came with
the product.
1
Attach the 10GbE mezzanine card to the bracket by aligning the four
ports to the corresponding port slots on the bracket. See Figure 3-61.
2
Install the screws to secure the 10GbE mezzanine card to the bracket.
See Figure 3-61.
3
Install the 10GbE mezzanine card assembly to the card bridge board on
the system-board assembly. See Figure 3-60.
4
Install the screws to secure the 10GbE mezzanine card assembly to the
