Dell POWEREDGE 4300, Installation And Troubleshooting Manual

Page: 93 / 217

Checking Inside the Computer 7-5
2. Check that no tools or parts (including screws) are left inside the computer.
3. Make sure the keylock on the cover is in the unlocked position.
4. Fit the cover over the side rail at the bottom of the chassis, and slide it closed.
5. Secure the cover with the keylock.
6. Set the keylock to the locked position.
5HPRYLQJWKH)URQW%H]HO
Use the following procedure to remove the front bezel of the computer:
1. Remove the computer cover.
See “Removing the Computer Cover” found earlier in this chapter.
2. With your fingertips, gently pry loose the four tabs along the right edge of the
bezel, and disengage the three clips on the opposite edge from the chassis (see
Figure 7-3).
3. Rotate the bezel to the left to disengage and remove it.
)LJXUH5HPRYLQJWKH)URQW%H]HO
clips (3)
tabs (4)
front bezel