Dell PowerEdge 1855, Configuration Manual

Page: 37 / 296

Configuring the KVM Switch Module
35
Avocent Digital Access KVM Module–Remote Operation
The Avocent Digital Access KVM switch module allows you to manage server modules and virtual
media from a remote location.
Configuring the Avocent Digital Access KVM Module
Use the DRAC/MC GUI to configure the Avocent Digital Access KVM Module.
1
Open a Web browser.
2
In the Address field, type the IP address of the DRAC/MC that is connected to the Avocent
Digital Access KVM Module, and then press <Enter>.
3
In the Logon box, type your user name and password, and then click OK .
NOTE:
The default user name is root ; the default password is calvin .
4
Turn on the system containing the KVM module. Ensure that the system power indicator is
green before proceeding to step 5.
5
Click the Configuration tab and select Network .
6
Use the Network Configuration page to configure the Avocent Digital Access KVM module’s
NIC settings. Table 2-3 describes each NIC setting.
NOTE:
To ensure proper communications between the Avocent Digital Access KVM Module and the
DRAC/MC, configure your Avocent Digital Access KVM Module’s IP address in the same subnet as the
DRAC/MC.
NOTE:
To change any of the settings on the Network Configuration page, you must have Configure
DRAC/MC permission.