Dell PowerEdge 1855, Configuration Manual

Page: 32 / 296

30
Configuring the KVM Switch Module
www
.dell.com | support.dell.com
5
Click OK .
To remove a server module from the Scan list:
1
In the Scan dialog box, click to disable the check box next to a server module to be removed.
-or-
Double-click on a server module's name or slot.
-or-
Click the
Clear button to remove all server modules from the Scan list.
2
Click OK .
To start the scan mode:
1
Press <Print Screen>.
2
Click Commands .
3
Select Scan Enable in the Command dialog box.
To cancel scan mode:
1
Select a server module if OSCAR is open.
-or-
Move the mouse or press any key on the keyboard if OSCAR is not open. Scanning will stop
at the currently selected server module.
-or-
Press <Print Screen>.
2
Click Commands .
3
Clear Scan Enable .
Changing the Display Behavior
Use the Menu dialog box to change the display order of server modules and set a screen delay time
for OSCAR.
To access the Menu dialog box:
1
Press <Print Screen> to launch OSCAR.
2
Click Setup - Menu .
To choose the display order of server modules in the Main dialog box:
1
Select Name to display server modules alphabetically by name.
-or-
Select
Slot to display server modules numerically by slot number.
2
Click OK .