Dell PowerEdge 1855, Configuration Manual

Page: 28 / 296

26
Configuring the KVM Switch Module
www
.dell.com | support.dell.com
Avocent Analog KVM Switch Module
NOTE:
The Avocent Analog KVM switch ACI port (Figure 2-1) can only be used to connect to ARI ports
on Dell console switches, with the latest firmware revision installed. To connect to other types or brands
of switches, including Avocent switches, you must connect to the switch’s PS2 and video ports using the
proprietary dongle provided with that switch.
Figure 2-1. Avocent Analog KVM Switch Module
Avocent Analog KVM and Avocent Digital Access KVM
Switch Modules–Configuring the KVM Using the Local Port
To configure an Avocent Analog KVM (Figure 2-1) or Avocent Digital Access KVM switch module
(Figure 2-2) using direct access through a keyboard, monitor, and mouse, you will use the
On-Screen Configuration and Reporting (OSCAR) graphical user interface.
Figure 2-2. Avocent Digital Access KVM Switch Module
custom connector for
custom cable (PS/2 [2]
and video)
identification indicator
power indicator
ACI port
RJ-45 connector
(Ethernet interface)
custom connector (for custom
KVM cable - PS/2 [2] and video)