Dell P110F, Service Manual

Page: 30 / 111

3. Adhere the tape to secure the battery cable to the keyboard bracket.
4. Align the screw holes on the 3-cell battery to the screw holes on the palm-rest and keyboard assembly.
5. Tighten the three captive screws to secure the 3-cell battery to the palm-rest and keyboard assembly.
6. Connect the battery cable to the connector on the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Removing the 4-cell battery
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
The following image indicates the location of the 4-cell battery and provides a visual representation of the removal procedure.
Steps
1. Use the pull tab to disconnect the battery cable from the connector on the system board.
2. Loosen the three captive screws that secure the 4-cell battery to the palm-rest and keyboard assembly.
3. Peel back the tape that secures the battery cable to the keyboard bracket.
4. Lift the 4-cell battery along with the battery cable off the palm-rest and keyboard assembly.
Installing the 4-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
30 Removing and installing components