Steps
1. Peel back the tape that secures the tweeter-speaker cable to the audio daughter-board flexible flat cable.
2. Disconnect the main-speaker cable and the audio daughter-board flexible flat cable from the respective connectors on the
system board.
3. Peel back the audio daughter-board flexible flat cable from the palm-rest and keyboard assembly.
4. Remove the two screws (M2x2.5) that secure the audio daughter-board to the system board.
5. Remove the audio daughter-board along with the audio daughter-board flexible flat cable from the system.
6. Disconnect and remove the audio daughter-board flexible flat cable from the connector on the audio daughter-board.
Installing the audio daughter-board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the audio daughter-board and provides a visual representation of the installation
procedure.
Steps
1. Connect the audio daughter-board flexible flat cable to the connector on the audio daughter-board.
2. Place the audio daughter-board along with the audio daughter-board flexible flat cable into its slot on the system.
3. Replace the two screws (M2x2.5) to secure the audio daughter-board to the system board.
50
Removing and installing components
Summary of Contents for P110F
