Figure 1. WWAN configuration
4. Place the WWAN-card bracket on the WWAN card.
5. Align the screw hole on the WWAN-card bracket with the screw hole on the system board.
6. Replace the screw (M2x2.5) to secure the WWAN-card bracket and the WWAN card to the system board.
7. Place the WWAN-card shield over the WWAN card and secure it in place.
NOTE:
Insert the edges of the WWAN-card shield into the clips on the system board to secure it in place.
NOTE:
For instructions on how to find your computer's International Mobile Station Equipment Identity (IMEI) number,
search in the Knowledge Base Resource at
.
Next steps
1. Install the
.
After working inside your computer
.
26
Removing and installing components
Summary of Contents for P110F
