Dell P110F, Service Manual

Page: 31 / 111

About this task
The following image indicates the location of the 4-cell battery and provides a visual representation of the installation procedure.
Steps
1. Place the 4-cell battery along with the battery cable on the palm-rest and keyboard assembly.
2. Adhere the tape to secure the battery cable to the keyboard bracket.
3. Align the screw holes on the 4-cell battery to the screw holes on the palm-rest and keyboard assembly.
4. Tighten the three captive screws to secure the 4-cell battery to the palm-rest and keyboard assembly.
5. Connect the battery cable to the connector on the system board.
Next steps
1. Install the base cover .
2. Follow the procedure in After working inside your computer .
Thermal module
Removing the thermal module
Prerequisites
1. Follow the procedure in Before working inside your computer .
2. Remove the base cover .
About this task
NOTE: The thermal module may become hot during normal operation. Allow sufficient time for the thermal module to cool
before you touch it.
NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the thermal module. The oils in your
skin can reduce the heat transfer capability of the thermal grease.
The following image indicates the location of the thermal module and provides a visual representation of the removal procedure.
Removing and installing components 31