Installing the power switch
1.
Slide the power switch module into the slot on the chassis until it clicks into place.
2.
Connect the power switch cable to the connector on the system board.
3.
Install the:
a.
b.
c.
d.
e.
4.
After Working Inside Your Computer
Removing the power supply unit (PSU)
1.
Before Working Inside Your Computer
.
2.
Remove the:
a.
b.
c.
d.
e.
3.
To release the PSU:
a. Disconnect the power cable from the system board [1] [2].
b. Unroute the power cables from the retention clips on the chassis [3] [4].
19
