Dell OptiPlex 5040 Series Owner'S Manual Download Page 40

Page: 40 / 63

Table 5. General

Option

Description

System Information

Displays the following information:
• System Information: Displays

BIOS Version, Service Tag, Asset Tag,

Ownership Date, Manufacture Date,

and the

Express Service Code

• Memory Information: Displays

Memory Installed, Memory Available,

Memory Speed, Memory Channels Mode, Memory Technology, DIMM 1

Size,

DIMM 2 Size

DIMM 3 Size

, and

DIMM 4 Size

• PCI Information: Displays

SLOT1, SLOT2, SLOT3, SLOT4

, and

SLOT5_M.

• Processor Information: Displays

Processor Type, Core Count, Processor

ID, Current Clock Speed, Minimum Clock Speed, Maximum Clock

Speed, Processor L2 Cache, Processor L3 Cache, HT Capable,

and

64-

Bit Technology.

• Device Information: Displays

SATA-0, LOM MAC Address, Video

Controller, Audio Controller, Wi-Fi Device,

and

Bluetooth Device

Boot Sequence

Allows you to specify the order in which the computer attempts to find an
operating system from the devices specified in this list.
• Legacy
• UEFI

Advanced Boot Options

Allows you to select the Enable Legacy Option ROMs option, when in UEFI

boot mode. By default, this option is enabled.

Date/Time

Allows you to set the date and time settings. Changes to the system date

and time take effect immediately.

Table 6. System Configuration

Option

Description

Integrated NIC

Allows you to control the on-board LAN controller. The options are:
• Disabled
• Enabled (default)
• Enabled w/PXE
• Enabled w/Cloud Desktop

NOTE: Depending on the computer and its installed devices, the items
listed in this section may or may not appear.

WIDI

Allows you to connect to display through WiFi. WIDI requires Intel WiFi card,

Intel graphics, and WIDI receiver in display (or WIDI compliant display). To
install the WIDI application, see the dell.com/support site to download the
WIDI application.

NOTE: When installing the WIDI application, connect the display to Intel
on-board graphic output.

Serial Port

Allows you to determine how the built-in serial port to operate. The options

are:
• Disabled
• COM 1 – Default setting
• COM 2
• COM 3

Summary of Contents for OptiPlex 5040 Series
































































Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands

Dell OptiPlex 5040 Series, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands