Dell OptiPlex 5040 Series Owner'S Manual Download Page 41

Page: 41 / 63

Option

Description

• COM 4

SATA Operation

Allows you to configure the operating mode of the integrated hard drive
controller.
• Disabled = The SATA controllers are hidden
• ATA = SATA is configured for ATA mode
• RAID ON = SATA is configured to support RAID mode

Drives

Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
• SATA-3

Smart Reporting

This field controls whether hard drive errors for integrated drives are
reported during system startup. This option is disabled by default.

USB Configuration

Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports

All the options are enabled by default.

Front USB Configuration

Allows you to enable or disable the front USB ports. All the ports are enabled

by default.

Back USB Configuration

Allows you to enable or disable the back USB ports. All the ports are enabled

by default.

USB PowerShare

This option allows you to charge the external devices, such as mobile

phones, music player. This option is disabled by default.

Audio

Allows you to enable or disable the integrated audio controller.
• Enable Microphone
• Enable Internal Speaker

Both the options are enabled by default.

Miscellaneous Devices

Allows you to enable or disable the various on-board devices.
• Enable PCI Slot
• Enable Media Card (default option)
• Disable Media Card

Table 7. Video

Option

Description

Primary Display

Allows you to select the primary display when multiple controllers are

available in the system.
• Auto

Summary of Contents for OptiPlex 5040 Series
































































Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands

Dell OptiPlex 5040 Series, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands