Dell OptiPlex 5040 Series Owner'S Manual Download Page 3

Page: 3 / 63

Contents

1 Working on your computer.................................................................................5

Before working inside your computer

..................................................................................................5

Turning off your computer

................................................................................................................... 6

After working inside your computer

.....................................................................................................6

2 Removing and installing components..............................................................8

Removing the cover

.............................................................................................................................. 8

Installing the cover

................................................................................................................................ 8

Removing the front bezel

..................................................................................................................... 8

Installing the front bezel

....................................................................................................................... 9

Removing the fan duct

..........................................................................................................................9

Installing the fan duct

..........................................................................................................................10

Removing the heat sink assembly

...................................................................................................... 10

Installing the heat sink assembly

........................................................................................................ 10

Removing the processor

......................................................................................................................11

Installing the processor

........................................................................................................................11

Removing the memory module

..........................................................................................................12

Installing the memory module

............................................................................................................12

Removing the hard drive assembly

.....................................................................................................12

Removing the hard drive from the hard drive bracket

.......................................................................13

Installing the hard drive into the hard drive bracket

.......................................................................... 14

Installing the hard drive assembly

.......................................................................................................14

Removing the optical drive

................................................................................................................. 14

Installing the optical drive

................................................................................................................... 16

Removing the expansion card

............................................................................................................ 16

Installing the expansion card

...............................................................................................................17

Removing the system fan

.................................................................................................................... 17

Installing the system fan

......................................................................................................................18

Removing the power switch

............................................................................................................... 18

Installing the power switch

................................................................................................................. 19

Removing the power supply unit (PSU)

..............................................................................................19

Installing the power supply unit (PSU)

................................................................................................ 21

Removing the VGA daughter board

....................................................................................................21

Installing the VGA daughter board

..................................................................................................... 22

Removing the intrusion switch

...........................................................................................................22

Installing the intrusion switch

.............................................................................................................23

Removing the SD card reader

.............................................................................................................23

Installing the SD card reader

.............................................................................................................. 24

Summary of Contents for OptiPlex 5040 Series
































































Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands

Dell OptiPlex 5040 Series, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands