Dell OptiPlex 5040 Series Owner'S Manual Download Page 55

Page: 55 / 63

Option

Description

• DNS (Default)

Server Name

Allows you to specify the name of the server

Server IP Address

Specifies the primary static IP address of the cloud desktop server. The
default IP address is 255.255.255.255

Server port

Specifies the primary port of the cloud desktop. The default setting is 06910.

Client Address Method

Specifies how the client will obtain the IP address.
• Static IP
• DHCP (Default)

Client IP address

Specifies the static IP address of the client. The default IP address is
255.255.255.255

Client Subnet Mask

Specifies the subnet mask address of the client. The default IP address is
255.255.255.255

Client Gateway

Specifies the gateway address of the client. The default IP address is
255.255.255.255

DNS IP Address

Specifies the DNS IP address of the client. The default IP address is
255.255.255.255

Domain Name

Specifies the domain name of the client.

Advanced

Allows you to turn on the Verbose mode for advanced debugging. This

option is disabled by default.

Table 31. System logs

Option

Description

BIOS Events

Displays the system event log and allows you to:
• Clear Log
• Mark all Entries

Table 32. Advanced configurations

Option

Description

ASPM

Allows you to activate the state power management.
• Auto (Default)
• Disabled
• L1 Only

Updating the BIOS

It is recommended to update your BIOS (System Setup), on replacing the system board or if an update is
available. For laptops, ensure that your computer battery is fully charged and connected to a power
outlet

Restart the computer.

Go to

Dell.com/support

Summary of Contents for OptiPlex 5040 Series
































































Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands

Dell OptiPlex 5040 Series, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5040 Series

Reviews:

Related manuals for OptiPlex 5040 Series

Brands by name

Popular brands