Figure 31. Removing and installing the SD vFlash card
1.
SD vFlash card
2. SD vFlash card slot
3.
To install the SD vFlash card, with the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.
NOTE: The slot is keyed to ensure correct insertion of the card.
4.
Press inward on the card to lock it into the slot.
Removing the vFlash media unit
Prerequisites
1.
Ensure that you read the Safety instructions section in this document.
2.
Complete the tasks listed in Before working inside your system section in this document.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Remove the screw securing the vFlash media unit to the chassis.
2.
Remove the cable from the vFlash media unit and the backplane.
3.
Slide the vFlash media unit toward the front of chassis and lift it out of the system.
80
