Figure 8. Removing and installing the front bezel
Installing front bezel
1.
Hook the right end of the bezel onto the chassis.
2.
Fit the free end of the bezel onto the system.
3.
Secure the bezel with the key lock.
Removing system cover
Prerequisites
1.
Ensure that you read the Safety instructions section in this document.
2.
Turn off the system, including any attached peripherals.
3.
Disconnect the system from the electrical outlet and peripherals.
4.
Remove the optional bezel. For more information, see the Removing the front bezel section in this
document.
Steps
1.
Rotate the latch release lock counter clockwise to the unlocked position.
2.
Lift the latch and rotate the latch toward the back of the system.
The system cover will slide back and the tabs on the system cover will disengage from the slots on
the chassis.
NOTE: The position of the latch may vary depending on the configuration of your system.
3.
Hold the cover on both sides, and lift the cover away from the system.
43
