Installing expansion card risers
Prerequisites
1.
Ensure that you read the Safety instructions section in this document.
2.
Complete the tasks listed in Before working inside your system section in this document.
3.
If applicable, reinstall the expansion card(s) into the expansion card riser 1.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Align the expansion card riser with the connectors and the riser guides on the system board.
2.
Lower the expansion card riser into place until the expansion card riser is fully seated in the
connector.
Next steps
1.
Install the expansion card(s) into the expansion card risers 2 or 3.
2.
Complete the tasks listed in After working inside your system section in this document.
3.
Install any device drivers required for the card as described in the documentation for the card.
SD vFlash media card
A vFlash SD card is a Secure Digital (SD) card that plugs into the vFlash SD card slot in the system. It
provides persistent on-demand local storage and a custom deployment environment that allows
automation of server configuration, scripts, and imaging. It emulates USB drive(s). For more information,
see the
Integrated Dell Remote Access Controller User’s Guide
at
dell.com/esmmanuals
.
Replacing SD vFlash card
1.
Locate the vFlash media slot on the back panel of the system.
2.
To remove the installed SD vFlash card, push inward on the card to release it and pull the card from
the card slot.
79
