Figure 54. Removing and installing the I/O panel —NX3230
1.
I/O panel cable
2. hard-drive backplane
3. screw (3)
4. I/O panel
5. chassis
Next steps
1.
Replace the I/O panel. See the Installing the I/O Panel section in this document.
2.
Complete the tasks listed in the After working inside your system section in this document.
Installing the I/O panel
Prerequisites
1.
Ensure that you read through the Safety instructions section in this document.
2.
Complete the tasks listed in Before working inside your system section in this document.
3.
Keep the T15 Torx screw driver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
115
