Dell N2000 Series, Configuration Manual

Page: 1184 / 1460

1184
Configuring OSPF and OSPFv3
console(config-router)# network 10.2.4.0 0.0.0.255
area 0.0.0.2
6 For IPv4: Configure a metric cost to associate with static routes when they
are redistributed via OSPF:
console(config-router)# redistribute static metric
1 subnets
console(config-router)# exit
7 For IPv6: Define an OSPF router. Define Area 1 as a stub and area 2 as a
Not-So-Stubby-Area (NSSA). Configure a metric cost to associate with
static routes when they are redistributed via OSPF:
console(config)# ipv6 router ospf
console(config-rtr)# router-id 2.2.2.2
console(config-rtr)# area 0.0.0.1 stub
console(config-rtr)# area 0.0.0.2 nssa
console(config-rtr)# redistribute static metric 105
metric-type 1
console(config-rtr)# exit
Configuring a Virtual Link for OSPF and OSPFv3
In this example, Area 0 connects directly to Area 1. A virtual link is defined
that traverses Area 1 and connects to Area 2. This example assumes other
OSPF settings, such as area and interface configuration, have already been
configured.
Figure 35-37 illustrates the relevant components in this example OSPF
configuration.