Dell N2000 Series, Configuration Manual

Page: 527 / 1460

Configuring Port and System Security
527
Figure 19-10. 802.1X Example
The following example shows how to configure the example shown in
Figure 19-10.
1 Configure the RADIUS server IP address and shared secret (
secret
).
console# configure
console(config)# radius-server host 10.10.10.10
console(Config-radius)# exit
console(config)# radius-server key secret
console(config)# exit
2 Enable 802.1X port-based access control on the switch.
console(config)# dot1x system-auth-control
3 Configure ports 9 and 24 to be in the Authorized state, which allows the
devices to connect to these ports to access the switch services without
authentication.
console(config)# interface range Gi1/0/9,Gi1/0/24
Authentication Server
(RADIUS)
LAN
Dell Networking Switch
Server
(Port 9)
Clients
(Ports 1 and 3)
Printer
(Port 7)
LAN Uplink
(Port 24)
Physically Unsecured Devices
Physically Secured Devices
Clients
(Port 8)