Dell Latitude E4200 Service Manual Download Page 73

Page: 73 / 73

Slide the card into the connector labeled WWAN.

Press the card down and hold it in place.

Replace the M2 x 3-mm screw.

Connect the white antenna cable to the connector labeled "main" (white triangle), and connect the black antenna cable to the connector labeled
"aux" (black triangle).

Replace the service panel (see

Replacing the Service Panel

Follow the procedures in

After Working on Your Computer

Back to Contents Page

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board,

and realign the card.

NOTICE:

To avoid damage to the WWAN card, ensure the cables are not under the card when you replace it.

NOTICE:

Insert a WWAN card only into the slot labeled WWAN.

Summary of Contents for Latitude E4200










































































Search results

Summary of Contents for Latitude E4200

Reviews:

Related manuals for Latitude E4200

Brands by name

Popular brands

Dell Latitude E4200, Service Manual

Search results

Summary of Contents for Latitude E4200

Reviews:

Related manuals for Latitude E4200

Brands by name

Popular brands