manualshive.com logo in svg

Dell Latitude E4200, Service Manual

Share
Download
Dell Latitude E4200 Service Manual Download Page 24

Back to Contents Page

  

 

 Fan  

Dell™ Latitude™ E4200 Service Manual

 

  

Removing the Fan 

 

  

Replacing the Fan 

 

 

 

Removing the Fan  

 

 

 

 

1.

Follow the instructions in 

Before Working on Your Computer

.  

 

 

  

2.

Remove the service panel (see 

Removing the Service Panel

).  

 

 

  

3.

Remove the WLAN and WWAN cards (see 

Removing the WLAN/WiMax Card

 and 

Removing a WWAN Card

).  

 

 

  

4.

Remove the memory module (see 

Removing the Memory Module

).  

 

 

  

5.

Remove the solid state drive (see 

Removing the Solid State Drive and Cable Assembly

).  

 

 

  

6.

Remove the LED cover (see 

Removing the LED Cover

).  

 

 

  

7.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

8.

Remove the module with Bluetooth

®

 wireless technology (see 

Removing the Card With Bluetooth Wireless Technology

).  

 

 

  

9.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

10.

Remove the coin-cell battery (see 

Removing the Coin-Cell Battery

).  

 

 

  

11.

Remove the palm rest assembly (see 

Removing the Palm Rest Assembly

).  

 

 

  

12.

Remove the two M2 x 3-mm screws from the fan.  
 

 

  

13.

Disconnect the fan connector from the system board.  
 

 

  

14.

Lift the fan away from the base assembly.  
 

  

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 

1  fan 

2  screws (2) 

3  fan connector 

 

 

 

 

Summary of Contents for Latitude E4200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands